Smart ATO RODI Solenoid

AutoAqua auto top off units now have the ability to hook directly up to a RODI solenoid to replace the pump they are equipped with out of the box. If you have upgraded to a larger system, or just simply don't have the room for an ATO storage container this may be the option for you.

Replacing the stock pump with the Smart Solenoid will easily take under 1 minute. Simply disconnect your current pump from the controller and plug in the solenoid. It is that easy.

The solenoid works in conjunction with the ATO controller and sensor to allow the flow of RODI water to your sump and when the water level is replenished the sensor will tell the controller to shut off power to the solenoid to close the valve and stop the flow of RODI water. The solenoid uses 1/4" push connect fittings to allow RO tubing to connect quickly.

All BRS RODI systems use 1/4" tubing on the product water line.

Note: While hooking a RODI system directly up to an aquarium can be a very simple, and reliable method for replenishing evaporated water there are inherent dangers that come with a direct connection to an endless water supply to your tank. By utilizing a solenoid in conjunction with the Smart ATO systems, you can help decrease the risk of an overflow, but as with all things mechanical or electrical can fail over time. We highly suggest placing a RODI float valve higher than the water level in the sump as a back up if the solenoid or controller is ever to get stuck in the on position.